AC450V-1000KW 3 Phase Load Bank With Best Sales And High Performance
Introduction
AC450V-1000KW 3 Phase Load Bank consist of dry load module and auto control module, test load and output power of generators, the test including setting, fluctuation,transient load/unload,recorded wave analysis,harmonic analysis,testing the static parameter and dynamic parameter
Applications
Application
(1) Control mode interlock: there is switch in control panel to choose control mode, other control mode is invalid if user choose one control mode.
(2) Local meter display data: 3 phase voltage, current, active power, reactive power, apparent power, power factor, frequency etc.
(3) Control mode: user can choose local control, remote control or intelligent control (PC control)
(4) Local manual control: local control panel in load bank, with multi load steps, controlled by buttons.
(5) Intelligent control: user can control load bank by data processing software of PC to make automatic load/unload, display, record and manager the test data, form curve, graph, also can be printed.
| System Parameter |
| Rating voltage/frequency | 450VAC, 3 phase 4 wire, wire voltage 450V, phase voltage 260V 50HZ/60HZ When voltage lower than 450V, it will change according to Ohm’ law |
| Max Load Power | Resistive Load: 1000kW |
| Load Resolution | Resistive Load: 13 steps, 1kW,2KW,2kW,5kW,10kW,10kW,20kW,50kW,100kW, 200kW,200kW, 200kW,200kW |
| Power Factor | 1 |
| Load Tolerance (each step) | ±5% |
| Load Tolerance (overall) | ±3% |
| Fan &Control Voltage | External 400V 3 phase 4 wire, wire voltage: 400V, phase voltage: 230V, 50HZ |
| Wire Connection | Load bank input——Copper bar (star coupling ”Y”) Control power input——Connector-bar |
| Communication Interface | RS485,RS232 |
| Insulation | F |
| Max Protection Grade | IP54 |
| Duty Cycle | Continuous |
| Cooling | Forced air cooling, by Axial Fan; horizontal inlet air, vertical exhaust cooling |
| Enclosure | Container type,with a ladder, air inlet and outlet with mesh enclosure and protection door |
| Internal Lighting | Adequate internal lighting will be provided |
| Transportation | Hoisting, there are lifting lug in top of casing |
| Color | Grey RAL7035 or as required |
| Dimensions | About 3000mm*2350mm*2591mm(L×W×H) |
| Operating Environment Parameter |
| Ambient Temperature | -10℃～+50℃ |
| Relative Humidity | ≤95% |
| Atmospheric Pressure | 86～106kPa |
| Brands of Main Components |
| Contactor | Schneider |
| Fuse | Miro |
| PLC | Siemens |
| Alloy Resistor | (self-developing) |
| Data Processing Software | (self-developing) |
Main features
(1) Load mode: manual load or automatic load.
(2) Manual load: input power and power factor, then will load according to the value.
(3) Preset Load: input the parameter of generator, choice 0%,25%,50%,75%,100%,110%, calculate power value automatically,
(4) Step by Step Load: during steady state load, load bank will increase or reduce power so that smoothly transit into target power, avoiding unscheduled transient load/unload. Step value and step interval can be set.
(5) Constant Power Load: automatically adjust to the power when the voltage fluctuation, keep the setting value.
(6) Auto Load: power and time can be set to some stage, process stage test automatically. Allow pause or process next stage during loading.
Product Tags:
|
|
Local Manual Control Resistive Load Bank 1000 KW With 260 V Phase Voltage Images
|
